The FLIR A6750 SLS longwave camera is the ideal choice for high-speed thermal events and fast moving targets. It offers extremely short integration times and windowed frame rates above 4,000 Hz, so you can freeze motion or achieve accurate temperature measurements on moving subjects. The 327,680 (640 x 512) pixel IR resolution and high sensitivity produce crisp imagery, well suited to electronics inspections, scientific research, and more.
- Products
- Research & Development
- High Performance Cameras
- Fixed Entry-Level Cameras
- FLIR A6750 SLS
Added to cart
-
Fast Integration Times
FLIR A6750 SLS capture all pixels from a scene simultaneously in under 190 µs with full frame-rates of 125 Hz—both crucial to imaging fast-moving objects.
-
Standard Video Interfaces
Gigabit Ethernet and analog video are simultaneously active yet independently controlled allowing greater flexibility for recording and display purposes.
-
Custom Cold Filters
Add custom cold filters for spectral detection to image through glass, measure the temperature of thin film plastics, and more.
Connectivity and Compatibility
The FLIR A6750 SLS is plug-and-play with third-party software, and works seamlessly with FLIR ResearchIR for intuitive viewing, recording, and advanced processing of thermal data. Use the optional SDK for integration into your own custom software program.
Contact Sales
Want more information on this product?
Call (866) 477-3687 to speak with a knowledgeable specialist.
Specifications
- Resolution
- 640 × 512
- Pixel Size [Square]
- 15 µm
- Spectral Range
- 7.5 µm (lower), 10–11µm (upper)
- Detector Type
- Strained-Layer Superlattice
- Camera f-number
- f/2.5
- Frame Rate [Full Window]
- Programmable; 0.0015 Hz to 125 Hz
- Integration Time
- 480 ns to ~full frame
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
- Optional Temperature Range [with band matched optics]
- 250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2)
- Filter Holder [Warm]
- Behind lens mount for standard 1 inch diameter filters
- Focus
- Manual
Imaging & Optical
- Available Lenses
- 17 mm, 25 mm, 50 mm, 100 mm, 200 mm
- Camera f-number
- f/2.5
- Close-up Lenses/Microscopes
- 1X
- Filter Holder [Warm]
- Behind lens mount for standard 1 inch diameter filters
- Image Time Stamp
- Yes
- Integration Time
- 480 ns to ~full frame
- NEI [Typical]
- N/A
- Noise Floor [Typical]
- N/A
- On Camera Image Storage
- None
- Overlay
- Fixed configuration, can be turned off
- Pixel Clock
- 50 MHz
- Pixel Size [Square]
- 15 µm
- Radiometric Data Streaming
- Gigabit Ethernet (GigE Vision)
- Readout Modes
- Asynchronous integrate while read; asynchronous integrate then read
- Readout Type
- Snapshot
- Sensor Cooling
- Closed-cycle rotary
- Standard Video
- SDI
- Standard Video Zoom
- Automatic, variable
- Subwindow Modes
- Flexible windowing down to 16 × 4 (steps of 16 columns, 4 rows)
- Thermal Sensitivity_NETD [typical]
- ≤45 mK (≤40 mK typical)
- Video Modes
- SDI: 720p@50/59.9, 1080p@25/29.9
Measurement & Analysis
- Ambient Drift Compensation [with factory cal]
- Yes
- Optional Temperature Range [with band matched optics]
- 250°C to 2000°C/482°F to 3632°F (ND1); 500°C to 3000°C/932°F to 5432°F (ND2)
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
General
- Size [L x W x H ] w/o Lens
- 226 × 102 × 109 mm (8.9 × 4.0 × 4.3 in.)
Related Documents
Export Restrictions
Export Restrictions
The information contained in this page pertains to products that may be subject to the International Traffic in Arms Regulations (ITAR) (22 C.F.R. Sections 120-130) or the Export Administration Regulations (EAR) (15 C.F.R. Sections 730-774) depending upon specifications for the final product; jurisdiction and classification will be provided upon request.
Want more information on this product?
Call (866) 477-3687 to speak with a knowledgeable specialist.